Install Guide

Cyberswipe Installation Instructions

Follow these 4 easy steps to install Cyberswipe on your vehicle.

Step 1: Disconnect Wiper Blade From Arm

Press on the wiper blade release tab and slide the blade off the arm.

Step 2: Unplug Hose From Blade

Disconnect the washer fluid hose from the wiper blade assembly.

Step 3: Re-route Hose + Oneway Valve Through Slot In The Wiper Arm

Thread the hose and one-way valve through the slot in the side of the wiper arm.

Step 4: Slide Cyberswipe Over Arm & Reconnect Hose + Oneway Valve

Slide the Cyberswipe over the wiper arm, then reconnect the hose + one-way valve.

Important Note: The one-way valve needs to be re-installed